DOOSAN DX12 EURO 6 code - Автозапчасти и автоХитрости

Автозапчасти и автоХитрости
Автозапчасти и автоХитрости
Автозапчасти и автоХитрости
EnglishRussian
Подписывайтесь на наш канал в Telegram и будьте всегда в курсе самых последних сообщений и публикаций с сайта.
Перейти к контенту
DOOSAN DX12 EURO 6
fault code definition

The fault code is defined according to SAE J2012, J1939 standard.
1) SAEJ2012
Example : P0002
P : Power train (Used)
C : Chassis (Not used)
B : Body(Not used)
U : Network (Used)
0002 : Fault numbers
2) SAEJ1939
Example : E000027-01
E : Engine (Not visible)
000027 : SPN 6-digit (Suspect Parameter Numbers)
01 : FMI 2-digit (Failure Mode Identifier)
• The FMI defined in the standard is divided into the following types. But some faults that could not be defined or duplicated were used to similar or reserved number.

No.     FMI Number Definition
0 Data Valid but Above Normal Operational Range, Most Severe Level
1 Data Valid but Below Normal Operational Range, Most Severe Level
2 Data Erratic, Intermittent or Incorrect (rationality)
3 Voltage Above Normal, or Shorted to High Source
4 Voltage Below Normal, or Shorted to Low Source
5 Current Below Normal, or Open Circuit
6 Current Above Normal, or Grounded Circuit
7 Mechanical System not Responding or Out of Adjustment
8 Abnormal Frequency or Pulse Width or Period
9 Abnormal Update Rate
10 Abnormal Rate of Change
11 Failure Code not Identifiable / Root Cause not Known
12 Bad Intelligent Device or Component
13 Out of Calibration
14 Special Instructions
15 Data Valid but Above Normal Range : Least Severe Level
16 Data Valid but Above Normal Range : Moderately Severe Level
17 Data Valid but Below Normal Range : Lease Severe Level
18 Data Valid but Below Normal Range : Moderately Severe Level
19 Received Network Data in Error : (Multiplexed Data)
20 Data Drifted High (rationality high)
21 Data Drifted Low (rationality low)
22 Reserved for SAE Assignment
23 Reserved for SAE Assignment
24 Reserved for SAE Assignment
25 Reserved for SAE Assignment
26 Reserved for SAE Assignment
27 Reserved for SAE Assignment
28 Reserved for SAE Assignment
29 Reserved for SAE Assignment
30 Reserved for SAE Assignment
31 Condition Exists
















Все описания в высоком качестве смотри в
Назад к содержимому